https://www.rc-labshop.nl/en_GB/ MijnWebwinkel RSS 2.0 Feed v1.0 https://www.rc-labshop.nl/en_GB/ https://www.rc-labshop.nl/en_GB/ Welcome to the RC-LAB's webshop. The webshop is currently closed. We will be in Ede this weekend during the Model Show Europe. The webshop will be fully stocked again after March 14th. Sorry for the inconvenience. Here are all the products we make. From Oled Dashboards and Lighting Systems to Concrete Block templates. If you have questions, feel free to contact the contact page https://www.rc-labshop.nl/en_GB/c-3323402/products/ https://www.rc-labshop.nl/en_GB/c-3323402/products/ Place your product info. https://www.rc-labshop.nl/en_GB/c-7129203/kinpin-besturing/ https://www.rc-labshop.nl/en_GB/c-7129203/kinpin-besturing/ After a long period of development, we finally got it done. The Multi Axle Kingpin Steering With a maximum of 4 servos that can be controlled by the Kingpin, this has become a versatile unit. Each servo is independently adjustable. Both the center point and the maximum angle. The direction of movement can also be set per servo. This not only allows for a standard setup, but also a split axle setup where servos have to move in the opposite direction or a servo that is mounted differently. https://www.rc-labshop.nl/en_GB/c-4098748/beier-connect/ https://www.rc-labshop.nl/en_GB/c-4098748/beier-connect/ Here you can find our Beier Connect Boards https://www.rc-labshop.nl/en_GB/c-4198023/light-pcb-s-for-trucks/ https://www.rc-labshop.nl/en_GB/c-4198023/light-pcb-s-for-trucks/ Ever since we entered the electronic road, the idea was to offer a wide range of components. Similarly, standard platines for trucks. Fully ready to be built, standard wiring and with resistors. Front, rear, spotlights. Brands and designs will be expanded in the future. https://www.rc-labshop.nl/en_GB/c-4951840/scania/ https://www.rc-labshop.nl/en_GB/c-4951840/scania/ All the lighting for the Scania in a row. From individual units to affordable sets. https://www.rc-labshop.nl/en_GB/c-6468990/scania-r470-r620/ https://www.rc-labshop.nl/en_GB/c-6468990/scania-r470-r620/ https://www.rc-labshop.nl/en_GB/c-6468993/scania-s770/ https://www.rc-labshop.nl/en_GB/c-6468993/scania-s770/ Front, Rear, Roof, Contour and Lamp Brackets. Everything according to the quality you are used to from us. Due to the strange construction of the front bumper, we are forced to tackle the design thoroughly. Unfortunately, this has resulted in the Front Plate not being Plug and Play. Loose LEDs and resistors are unfortunately the result (blame Tamiya). The complete sets are available in 3 versions: ∙ Front and Rear ∙ Full Set, completely assembled ∙ Full Set, DIY Version. LEDs and wiring for the Roof, Contour and Lamp Brackets are delivered separately https://www.rc-labshop.nl/en_GB/c-4819295/volvo-fh-16-750/ https://www.rc-labshop.nl/en_GB/c-4819295/volvo-fh-16-750/ This new truck from Tamiya has various lighting options Below you will find the individual items and the affordable sets. All lighting is available in 7.2 and 12 Volts PAY ATTENTION !!! Delivery only from April 15 due to holidays After our vacation, more photos of the items will also be posted. https://www.rc-labshop.nl/en_GB/c-4951870/mercedes/ https://www.rc-labshop.nl/en_GB/c-4951870/mercedes/ All the lighting for the Mercedes Actros and Arocs in a row. From individual units to affordable sets. https://www.rc-labshop.nl/en_GB/c-6468975/actros/ https://www.rc-labshop.nl/en_GB/c-6468975/actros/ https://www.rc-labshop.nl/en_GB/c-6468978/arocs/ https://www.rc-labshop.nl/en_GB/c-6468978/arocs/ https://www.rc-labshop.nl/en_GB/c-4951871/man-tgx/ https://www.rc-labshop.nl/en_GB/c-4951871/man-tgx/ All the lighting for the MAN TGX in a row. From individual units to affordable sets. https://www.rc-labshop.nl/en_GB/c-4951876/hella-s/ https://www.rc-labshop.nl/en_GB/c-4951876/hella-s/ All the lighting for the Lamp Brackets in a row. From individual units to affordable sets. https://www.rc-labshop.nl/en_GB/c-4951890/miscellaneous/ https://www.rc-labshop.nl/en_GB/c-4951890/miscellaneous/ Miscellaneous Lighting From loose LED to 7-chamber lighting https://www.rc-labshop.nl/en_GB/c-5635366/truck-accessoires/ https://www.rc-labshop.nl/en_GB/c-5635366/truck-accessoires/ https://www.rc-labshop.nl/en_GB/c-4146472/loads-and-accessories/ https://www.rc-labshop.nl/en_GB/c-4146472/loads-and-accessories/ https://www.rc-labshop.nl/en_GB/c-5635377/cabine-accessoires/ https://www.rc-labshop.nl/en_GB/c-5635377/cabine-accessoires/ https://www.rc-labshop.nl/en_GB/c-5635393/rotating-beacons/ https://www.rc-labshop.nl/en_GB/c-5635393/rotating-beacons/ https://www.rc-labshop.nl/en_GB/c-5635525/various/ https://www.rc-labshop.nl/en_GB/c-5635525/various/ https://www.rc-labshop.nl/en_GB/c-3375209/betonblocks/ https://www.rc-labshop.nl/en_GB/c-3375209/betonblocks/ While visiting the Matexpo in Kortrijk (Belgium), the idea arose when friends of RC Model Truck Bruges wanting to make "Betonblocks". Like the large blocks, but then the scale that suits RC trucks. As RC-Lab I was approached to convert these large blocks into the small versions. Designing molds and making to make these blocks in a simple and affordable way.During the TKD 2018 in Almere we came into contact with Betonblock. Since then we may also officially carry the name "Mini Betonblock" Starting with the standard blocks and molds. In the future all types will be available in both blocks and molds. https://www.rc-labshop.nl/en_GB/c-5199792/wheelloader-trailer/ https://www.rc-labshop.nl/en_GB/c-5199792/wheelloader-trailer/ Wheelloader Trailer https://www.rc-labshop.nl/en_GB/c-7608282/lowloader/ https://www.rc-labshop.nl/en_GB/c-7608282/lowloader/ We proudly present our newest addition to our range: The low loader with a detachable neck. After we launched our Shovel Low Loader a few years ago and then our Servo Steering System, we were soon asked if we would ever build a low loader... perhaps. We knew then and there that it had to be built. Especially in combination with our Servo Steering System, it would be the best combination. We offer a 4-axle low loader with a detachable neck and a manually extendable center section. The option to choose a different setup (3, 5, or 6 axles) is also available. A controller-controlled neck and a lighting kit are available as optional extras. The low loader is a blank canvas. No fancy details, unpainted, and no unusual features. You have to color this painting yourself. The low loader is delivered fully assembled and equipped with all electronics (including the Servo Steering System) and servos. Just plug in the battery and you're ready to go. The low loaders are produced in series. Feel free to let us know if a series is being built or when the next one will be built. https://www.rc-labshop.nl/en_GB/c-4637177/electrical-components/ https://www.rc-labshop.nl/en_GB/c-4637177/electrical-components/ In addition to the ready-made boards for Tamiya trucks, there are various other electro-technical components that exist in a truck or earth-moving machine. Think of voltage regulators, LEDs, wire, resistors, etc. Below is a collection of products that we sell. https://www.rc-labshop.nl/en_GB/c-5676721/connectors-and-cables/ https://www.rc-labshop.nl/en_GB/c-5676721/connectors-and-cables/ https://www.rc-labshop.nl/en_GB/c-5171735/hydraulics/ https://www.rc-labshop.nl/en_GB/c-5171735/hydraulics/ Models are getting more advanced. Trucks an groungmoving machines get there hydraulics. The couplings and tube you need is nog available in a hardware-store. Here you will find all kind of couplings, tubes and oil for your hydraulic models. https://www.rc-labshop.nl/en_GB/c-5457047/fasteners/ https://www.rc-labshop.nl/en_GB/c-5457047/fasteners/ To assemble a model you do need a bolt or a nut. We hope to be able to bring a standard range and to expand it more and more. https://www.rc-labshop.nl/en_GB/c-6923786/miscellaneous/ https://www.rc-labshop.nl/en_GB/c-6923786/miscellaneous/ https://www.rc-labshop.nl/en_GB/c-7601865/hooklift-roll-on-roll-off-containers/ https://www.rc-labshop.nl/en_GB/c-7601865/hooklift-roll-on-roll-off-containers/ In 2024 we started a collaboration with "De Zaag". He made containers for the Leimbach Hooklift system. Fully by hand. Together we sat down and made drawing for them. After the first batch, we dicided to take it to a further level. A full range of containers for Leimbach and LESU. All made out of Aluminium. Less in weight, but superstrong. Containers will be build by order, so delivery time will be 6 to 8 weeks. Powdercoat can be an option. https://www.rc-labshop.nl/en_GB/c-3375414/shipping/ https://www.rc-labshop.nl/en_GB/c-3375414/shipping/ Shipping of the products is provided by PostNL and their network partners. If your country is not there, send a message. Then we adjust it and give an indication of the shipping costs https://www.rc-labshop.nl/en_GB/c-3323403/contact/ https://www.rc-labshop.nl/en_GB/c-3323403/contact/ Any Questions: info@rc-labshop.nl